RIPEMD-160

RIPEMD-160 is a cryptographic hash function based upon the Merkle–Damgård construction. It is used in the Bitcoin standard. It is a strengthened version of the RIPEMD algorithm which produces a 128 bit hash digest while the RIPEMD-160 algorithm produces a 160-bit output. The compression function is made up of 80 stages, made up of 5 blocks, that run 16 times each. This pattern runs twice, with the results being combined at the bottom using modulo 32 addition.

Padding

The compression function works upon 16 32-bit unsigned words. This requires the message to be padded to a multiple of 512 bits and the byte stream input to be padded into 32-bit words. The padding scheme is identical to MD4 using Merkle–Damgård strengthening to prevent length extension attacks. This consists of a one being added to the end of the message, and the length of the message (in bits) being added to the end of the block. The bytes are pushed into the word low end first. Here are 4 examples of messages being padded into a word to show the possible patterns for different message lengths:

The length of the message should then be added to the second-to-last element (the length is saved as a 64-bit value across the last 2 words, but it is unlikely the message will be this long; 32-bits will certainly suffice for Bitcoin software.)

Compression Function

Sub block of the compression function.

The full compression function.

The compression function is made up of a variable sub block that the message block is passed through 16 times. There are 5 different variations for a total of 80 runs. This process occurs twice, with the data meeting at the bottom, to be moved on to the next block (if there is one), or added to the hash register if there isn't. The sub block can be varied by the design of, a nonlinear function, the order in which the message block is read in per round, the amount of a left rotate and a k constant. The design of the sub block and the overall layout of the compression function is shown to the right.

Pseudocode for the process:

for(i := 0 to blocks - 1) {
    aLeft := h0
    bLeft := h1
    cLeft := h2
    dLeft := h3
    eLeft := h4

    aRight := h0
    bRight := h1
    cRight := h2
    dRight := h3
    eRight := h4

    for(int j := 0 to 79) {
        t := rotleft(s[j]) (aLeft + f(bLeft, cLeft, dLeft) + X[r[i]]) + eLeft
        aLeft := eLeft;
        eLeft := dLeft
        dLeft := rotleft(10) (c)
        cLeft := bLeft
        bLeft := t

        Do same for right
    }

    t := h1 + cLeft + dRight
    h1 := h2 + dLeft + eRight
    h2 := h3 + eLeft + aRight
    h3 := h4 + aLeft + bRight
    h4 := h0 + bLeft + cRight
    h0 := t
}

The nonlinear functions are applied in the opposite directions, up and down the left and right lines. The design of the functions from top to bottom, on the left, and bottom to top, on the right, are (Java syntax for operations):

1. x ^ y ^ z
2. (x & y) | (~x & z)
3. (x | ~y) ^ z
4. (x & z) | (y & ~z)
5. z ^ (y | ~z)

The k values for left, from top to bottom are:

1. 0x00000000
2. 0x5A827999
3. 0x6ED9EBA1
4. 0X8F1BBCDC
5. 0XA953FD4E

The k values for right, from top to bottom are:

1. 0x50A28BE6
2. 0x5C4DD124
3. 0x6D703EF3
4. 0x7A6D76E9
5. 0x00000000

The order in which the words should be selected from the block array X for the left-hand-side are (each sub array within the 2D array represents a round. The array at the top, represents the round at the top, and the array at the bottom, represents the round at the bottom):

{{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, //Round 1
{7, 4, 13, 1, 10, 6, 15, 3, 12, 0, 9, 5, 2, 14, 11, 8}, //Round 2
{3, 10, 14, 4, 9, 15, 8, 1, 2, 7, 0, 6, 13, 11, 5, 12}, //Round 3
{1, 9, 11, 10, 0, 8, 12, 4, 13, 3, 7, 15, 14, 5, 6, 2}, //Round 4
{4, 0, 5, 9, 7, 12, 2, 10, 14, 1, 3, 8, 11, 6, 15, 13}} //Round 5

The order in which the words should be selected from the array X for the right-hand-side are (following the same pattern as above):

{{5, 14, 7, 0, 9, 2, 11, 4, 13, 6, 15, 8, 1, 10, 3, 12}, //Round 1
{6, 11, 3, 7, 0, 13, 5, 10, 14, 15, 8, 12, 4, 9, 1, 2}, //Round 2
{15, 5, 1, 3, 7, 14, 6, 9, 11, 8, 12, 2, 10, 0, 4, 13}, //Round 3
{8, 6, 4, 1, 3, 11, 15, 0, 5, 12, 2, 13, 9, 7, 10, 14}, //Round 4
{12, 15, 10, 4, 1, 5, 8, 7, 6, 2, 13, 14, 0, 3, 9, 11}} //Round 5

The order of the left rotates on the left-hand-side are:

{{11, 14, 15, 12, 5, 8, 7, 9, 11, 13, 14, 15, 6, 7, 9, 8}, //Round 1
{7, 6, 8, 13, 11, 9, 7, 15, 7, 12, 15, 9, 11, 7, 13, 12}, //Round 2
{11, 13, 6, 7, 14, 9, 13, 15, 14, 8, 13, 6, 5, 12, 7, 5}, //Round 3
{11, 12, 14, 15, 14, 15, 9, 8, 9, 14, 5, 6, 8, 6, 5, 12}, //Round 4
{9, 15, 5, 11, 6, 8, 13, 12, 5, 12, 13, 14, 11, 8, 5, 6}} //Round 5

The order of the left rotates on the right-hand-side are:

{{8, 9, 9, 11, 13, 15, 15, 5, 7, 7, 8, 11, 14, 14, 12, 6}, //Round 1
{9, 13, 15, 7, 12, 8, 9, 11, 7, 7, 12, 7, 6, 15, 13, 11}, //Round 2
{9, 7, 15, 11, 8, 6, 6, 14, 12, 13, 5, 14, 13, 13, 7, 5}, //Round 3
{15, 5, 8, 11, 14, 14, 6, 14, 6, 9, 12, 9, 12, 5, 15, 8}, //Round 4
{8, 5, 12, 9, 12, 5, 14, 6, 8, 13, 6, 5, 15, 13, 11, 11}}; //Round 5

Attribution

This content is based on content sourced from https://en.bitcoin.it/wiki/RIPEMD-160 under Creative Commons Attribution 3.0. Although it may have been extensively revised and updated, we acknowledge the original authors.