Difference between revisions of "Bitcoin Transactions"

 
(97 intermediate revisions by 5 users not shown)
Line 1: Line 1:
=DISCLAIMER=
+
A Bitcoin '''transaction''' consists of a version number, a locktime value, a list of inputs and a list of outputs.
This article is a direct copy of the original https://en.bitcoin.it/wiki/Transaction and has not been checked for correctness or edited.
 
24 September 2019
 
Expected review by: 15 October 2019
 
  
Review BJL 20190926
+
The primary functionality of a Bitcoin transaction is to transfer custody of bitcoin from one to another.
  
Need to remove references to P2SH and Witness data
+
A Bitcoin transaction can also serve as a vehicle for smart contracts, recording data, attestation and many other secondary functionalities.
  
Re-frame transaction types and remove references to Addresses
+
A transaction can be created and iterated inside a [[Payment Channels|Payment Channel]] using [[nLocktime and nSequence]] interlocks, or sent directly to [[The Bitcoin Network]] for inscription into a [[block]].
 +
A transaction uses [[UTXO|unspent transaction outputs (UTXOs)]] as inputs and distributes their value to new outputs. UTXOs are the 'coins' in which all bitcoins are stored.
  
Link script and other pages
+
Transactions are not encrypted, so it is possible to browse and view every transaction ever collected into a block. Once transactions have been seen and validated by a majority of block creating nodes in the Bitcoin network, they can be considered settled. When they are eventually mined into a block, miners collaboratively agree on the order in which they were seen by the network.
  
EDITS:
+
Transactions are referenced using their [[TXID]] which is a double [[SHA-256]] hash of the fully serialised transaction.
  
Removed TXBinaryMap.png image
+
Transaction outputs are puzzle scripts called ScriptPubKeys which are typically used to lock the contained bitcoin value, sometimes also called locking script. Outputs are redeemed by making them inputs to new transactions and providing a ScriptSig (sometimes called unlocking script) which is a valid solution that unlocks the bitcoin held in the ScriptPubKey (locking script). Outputs may have zero value in bitcoin, but may carry value in another form such as data or tokens. Scripts can be complex and specialised and may have more than one way to be redeemed.
  
Edited first paragraph
+
All transactions are captured on the ledger in [[Block|blocks]] on the [[blockchain]], and can be viewed with a [[block explorer]]. This can be useful for seeing the technical details of transactions in action and for verifying payments.
  
Edited second paragraph
+
==General format of a Bitcoin transaction==
 
+
The following outlines the elements that are serialised to build a valid Bitcoin transaction.
Edited table
 
 
 
Added P2PK, P2RPH, P2MS and re-organised article
 
 
 
STILL TO DO:
 
#Double check all data and make sure that tables and other information are correct
 
#Add infographics for inputs, outputs and transaction combination (replacing images on original BTC Core page)
 
 
 
 
 
 
 
 
 
 
 
 
 
A '''transaction''' is a serialized data item that authorizes the transfer of Bitcoin value from inputs to outputs. A transaction can be ephemeral if it is created inside a Payment Channel, or it can be sent to the Bitcoin Network [[network]] and collected into a [[block]]. A transaction typically references previous transaction outputs as new transaction inputs and dedicates all input Bitcoin values to new outputs. Unspent Transaction Outputs (UTXOs) are the 'coins' in which all Bitcoins are stored. Transactions are not encrypted, so it is possible to browse and view every transaction ever collected into a block. Once transactions have been seen and validated by a majority of block creating nodes the Bitcoin network, they can be considered immutable. When they are eventually mined into a block, miners collaboratively agree on the order in which they were seen by the network.
 
 
 
Transaction outputs are puzzle scripts called ScriptPubKeys which are typically used to lock the contained Bitcoin value. Outputs are redeemed by making them inputs to new transactions and providing a ScriptSig which is a valid solution to the puzzle that locks the Bitcoin. Some outputs may have zero Bitcoin, but carry value in another form such as data or tokens. Scripts can be complex and specialised and may have more than one way to be redeemed.
 
 
 
All transactions are visible in the [[block chain]], and can be viewed with a hex editor. A [[block explorer]] is a website where every transaction included within the block chain can be viewed in human-readable terms. This is useful for seeing the technical details of transactions in action and for verifying payments.
 
 
 
See also: [[Payment Channels]]
 
 
 
= General format of a Bitcoin transaction =
 
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 49: Line 25:
 
|-
 
|-
 
|Version no
 
|Version no
|currently 1
+
|currently 2
 
|4 bytes
 
|4 bytes
|-
 
|Flag
 
|If present, always 0001, and indicates the presence of witness data
 
|optional 2 byte array
 
 
|-
 
|-
 
|In-counter
 
|In-counter
| positive integer [[ Protocol#Variable_length_integer|VI = VarInt]]
+
| positive integer VI = [[VarInt]]
 
| 1 - 9 bytes  
 
| 1 - 9 bytes  
 
|-
 
|-
 
|list of inputs
 
|list of inputs
|[[Bitcoin_Transactions#General_format_.28inside_a_block.29_of_each_input_of_a_transaction_-_Txin|Input Structure]]
+
|[[Bitcoin_Transactions#Format of a Transaction Input|Input Structure]]
 
|<in-counter> qty with variable length per input
 
|<in-counter> qty with variable length per input
 
|-
 
|-
 
|Out-counter
 
|Out-counter
| positive integer [[ Protocol#Variable_length_integer|VI = VarInt]]
+
| positive integer VI = [[VarInt]]
 
| 1 - 9 bytes
 
| 1 - 9 bytes
 
|-
 
|-
 
|list of outputs
 
|list of outputs
|[[Bitcoin_Transactions#General_format_.28inside_a_block.29_of_each_output_of_a_transaction_-_Txout|Output Structure]]
+
|[[Bitcoin_Transactions#Format of a Transaction Output|Output Structure]]
 
|<out-counter> qty with variable length per output
 
|<out-counter> qty with variable length per output
 
|-
 
|-
|nLocktime
+
|[[NLocktime_and_nSequence#nLockTime|nLocktime]]
 
|if non-zero and sequence numbers are < 0xFFFFFFFF: block height or timestamp when transaction is final
 
|if non-zero and sequence numbers are < 0xFFFFFFFF: block height or timestamp when transaction is final
 
|4 bytes
 
|4 bytes
 
|}
 
|}
  
=== Example of a Bitcoin transaction with 1 input and 1 output only ===
+
==Transaction Inputs and Outputs==
  
==== Data ====
+
Each Bitcoin transaction is comprised of Inputs and Outputs. Inputs provide the funds to be spent in the transaction, and Outputs define where those funds should be allocated.
 
 
<pre>Input:
 
Previous tx: f5d8ee39a430901c91a5917b9f2dc19d6d1a0e9cea205b009ca73dd04470b9a6
 
Index: 0
 
scriptSig: 304502206e21798a42fae0e854281abd38bacd1aeed3ee3738d9e1446618c4571d10
 
90db022100e2ac980643b0b82c0e88ffdfec6b64e3e6ba35e7ba5fdd7d5d6cc8d25c6b241501
 
  
Output:
+
=== Inputs ===
Value: 5000000000
+
An '''input''' is a reference to an output from a previous transaction, and a transactions can include between 1 and 2<sup>32</sup> inputs.
scriptPubKey: OP_DUP OP_HASH160 404371705fa9bd789a2fcd52d2c580b65d35549d
 
OP_EQUALVERIFY OP_CHECKSIG</pre>
 
  
==== Explanation ====
+
All of the new transaction's input value (that is, the total coin value of the previous outputs referenced by the new transaction's inputs) are added up, and the total (less any [[transaction_fees]]) is consumed by the outputs of the new transaction.
  
The input in this transaction spends 50 BTC from output #0 in transaction f5d8... Then the output sends 50 BTC to a P2PKH puzzle. When the recipient wants to spend this money, he will reference output #0 of this transaction in an input of his own transaction and provide the solution to the P2PKH.
+
'''Previous tx''' is the [[TXID]] of a previous transaction.
  
=Transaction Inputs and Outputs=
+
'''Index''' is the specific output in the referenced transaction.
  
Each Bitcoin transaction is comprised of Inputs and Outputs. Inputs provide the funds to be spent in the transaction, and Outputs define where those funds should be allocated.
+
'''ScriptSig''' is the first half of a [[Opcodes_used_in_Bitcoin_Script|script]] which is provided when a UTXO is spent as an input to a transaction.
  
== Inputs ==
+
An input ScriptSig may contain many components. To redeem a P2PKH script the input must provide a public key and an [[Elliptic Curve Digital Signature Algorithm|ECDSA]] signature. The Public key is doubled hashed (First [[SHA-256]] then [[RIPEMD-160]]) and the resultant hash must match the hash embedded in the ScriptPubKey of the output being redeemed.
  
An '''input''' is a reference to an output from a previous transaction. Multiple inputs are often listed in a transaction. All of the new transaction's input values (that is, the total coin value of the previous outputs referenced by the new transaction's inputs) are added up, and the total (less any [[transaction_fees|transaction fee]]) is completely used by the outputs of the new transaction. '''Previous tx''' is a [[Wikipedia:Cryptographic_hash_function|hash]] of a previous transaction. '''Index''' is the specific output in the referenced transaction. '''ScriptSig''' is the first half of a [[Opcodes_used_in_Bitcoin_Script|script]] which is provided when a UTXO is spent as an input to a transaction.
+
The public key is then used to verify the redeemer's signature. Dependent on the [[SIGHASH flags]] used, the signature may cover a hash representing part or all of the transaction. Combined with the public key, this proves the transaction was created by a person or process that controls the keys needed to spend the bitcoin in the input.
  
An input scriptSig may contain many components. In the above example two items are needed to solve the script, being a signature and a public key. In a P2PKH script The public key must match the hash given in the script of the redeemed output. The public key is used to verify the redeemers signature, which is the second component. More precisely, the second component is an [[Wikipedia:Elliptic_Curve_Digital_Signature_Algorithm|ECDSA]] signature over a hash of a simplified version of the transaction. It, combined with the public key, proves the transaction was created by someone who controls the keys needed to spend the Bitcoin in the input. Various [[SIGHASH flags]] define how the transaction is simplified and can be used to create different types of payment.
+
=== Format of a Transaction Input ===
 
+
Otherwise known as a TXIN, the following table outlines the required elements of a valid transaction input.
 
 
=== General format (inside a block) of each input of a transaction - Txin ===
 
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 114: Line 76:
 
! Size
 
! Size
 
|-
 
|-
|Previous Transaction hash  
+
| Previous Transaction hash  
| doubled [[Wikipedia:SHA-256|SHA256]]-[[Wikipedia:Cryptographic_hash_function|hashed]] of a (previous) to-be-used transaction
+
| [[TXID]] of the transaction the output was created in
|32 bytes
+
| 32 bytes
 
|-
 
|-
|Previous Txout-index
+
| Previous Txout-index
| non negative integer indexing an output of the to-be-used transaction
+
| Index of the output (Non negative integer)
|4 bytes
+
| 4 bytes
 
|-
 
|-
 
|Txin-script length
 
|Txin-script length
|non negative integer [[ Protocol#Variable_length_integer|VI = VarInt]]
+
| Non negative integer VI = [[VarInt]]
|1 - 9 bytes
+
| 1 - 9 bytes
 
|-
 
|-
 
|Txin-script / scriptSig
 
|Txin-script / scriptSig
|[[Opcodes_used_in_Bitcoin_Script|Script]]
+
| [[Opcodes_used_in_Bitcoin_Script|Script]]
|<in-script length>-many bytes
+
| <in-script length>-many bytes
 
|-
 
|-
|sequence_no
+
| Sequence_no
|normally 0xFFFFFFFF; irrelevant unless transaction's lock_time is > 0
+
| Used to iterate inputs inside a payment channel. Input is final when nSequence = 0xFFFFFFFF
|4 bytes
+
| 4 bytes
 
|}
 
|}
  
 
The input sufficiently describes where and how to get the bitcoin amount to be redeemed.
 
The input sufficiently describes where and how to get the bitcoin amount to be redeemed.
If it is the (only) input of the first transaction of a block, it is called the generation transaction input and its content completely ignored. (Historically the Previous Transaction hash is 0 and the Previous Txout-index is -1.)
+
If it is the (only) input of the first transaction of a block, it is called the [[Coinbase]] message and includes information about which block it was mined in and a miner configurable data element.
  
 
== Outputs ==
 
== Outputs ==
 +
An '''output''' contains a piece of [[Opcodes_used_in_Bitcoin_Script|Bitcoin Script]] which can be used to lock bitcoins, requiring a certain set of keys or information to be provided to unlock them. Outputs can also be used to inscribe data onto the ledger.
  
An '''output''' contains a piece of [[Opcodes_used_in_Bitcoin_Script|Bitcoin Script]] which can be used to lock Bitcoins to a certain set of keys and/or inscribe data onto the ledger. The '''Value''' of an output is the number of Satoshis that this output will be worth when claimed. This '''ScriptPubKey''' is the second half of a a full script and is only completed when the output is spent. There can be more than one output, and they share the combined value of the inputs. Because each output from one transaction can only ever be referenced once by an input of a subsequent transaction, the entire value of the combined inputs needs to be allocated to the transaction outputs. Any remaining fees  If the input is worth 50 BTC but you only want to send 25 BTC, Bitcoin will create two outputs worth 25 BTC: one to the destination, and one back to you (known as "[[change]]", though you send it to yourself). Any input bitcoins not redeemed in an output is considered a [[transaction_fees|transaction fee]], which is awarded to whoever generates the block that the transaction is mined in.
+
This '''ScriptPubKey''' is the second half of a full script and is only completed when the output is spent. There can be more than one output, and they share the combined value of the inputs.  
 +
The '''Value''' of each output is the number of Satoshis that the script unlocks when solved.
 +
Because each output from one transaction can only ever be referenced once by an input of a subsequent transaction, the entire value of the combined inputs needs to be allocated to the transaction outputs. Any [[Satoshis]] left unallocated are considered to be paid in mining fees and are awarded to the miner whose node generates the block that the transaction is included in.
  
Outputs don't necessarily contain value as Bitcoins, and can carry zero satoshis. These outputs are typically used to carry other information or tokens for second layer applications or data handling.  
+
If a user's input is larger than the value they want to send, the transaction must create at least two outputs, one sending the required funds to the destination, and one sending the [[change]] back to the user.
  
'''SUGGEST AN INFOGRAPHIC HERE'''
+
Outputs can have a value of zero satoshis. Currently, these outputs are limited to [[False Return]] scripts and are typically used to carry other information or tokens for [[Application layer protocol|Application layer protocols]].
  
=== General format (inside a block) of each output of a transaction - Txout ===
+
===Format of a Transaction Output===
 +
Otherwise known as a TXOUT, the following table outlines the required elements of a valid transaction output.
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 159: Line 125:
 
|Txout-script length
 
|Txout-script length
 
|non negative integer
 
|non negative integer
|1 - 9 bytes [[ Protocol#Variable_length_integer|VI = VarInt]]
+
|1 - 9 bytes VI = [[VarInt]]
 
|-
 
|-
 
|Txout-script / scriptPubKey
 
|Txout-script / scriptPubKey
Line 165: Line 131:
 
|<out-script length>-many bytes
 
|<out-script length>-many bytes
 
|}
 
|}
The output sets the conditions to release this bitcoin amount later. The sum of the output values of the first transaction is the value of the mined bitcoins for the block plus possible transactions fees of the other transactions in the block.
+
The output's scriptPubKey sets the conditions to release this bitcoin amount later. The sum of the output values of the first transaction is the value of the mined bitcoins for the block plus possible transactions fees of the other transactions in the block.
  
=== Transaction Verification ===
+
== Transaction Validation ==
 +
To verify that inputs are authorized to collect the values of referenced outputs, Bitcoin uses a [[wikipedia:Forth_(programming_language)|Forth]]-like [[Advanced Bitcoin Scripting|scripting]] system. The input's scriptSig and the referenced output's scriptPubKey are evaluated (in that order), with scriptPubKey using the values left on the stack by the scriptSig. The input is authorized if scriptPubKey returns true. Through the scripting system, the sender can create very complex conditions that must be met in order to claim the output's value.
  
To verify that inputs are authorized to collect the values of referenced outputs, Bitcoin uses a Forth-like [[Opcodes_used_in_Bitcoin_Script|scripting]] system. The input's scriptSig and the ''referenced'' output's scriptPubKey are evaluated (in that order), with scriptPubKey using the values left on the stack by scriptSig. The input is authorized if scriptPubKey returns true. Through the scripting system, the sender can create very complex conditions that people have to meet in order to claim the output's value. For example, it's possible to create an output that can be claimed by anyone without any authorization. It's also possible to require that an input be signed by ten different keys, or be redeemable with a password instead of a key.
+
For example, it's possible to create an output that can be claimed by anyone without any authorization. It's also possible to require that an input be signed by ten different keys or be redeemable with a password instead of a key.
  
 
= Puzzles and Solutions =
 
= Puzzles and Solutions =
  
The flexible scripting language enabled by the Bitcoin protocol allows a multitude of different transaction types to be created. Each scriptSig/scriptPubKey pair is validated by the network miners and mined into a block if found to be valid. Some commonly used Bitcoin puzzle types are described below:
+
The flexible scripting language enabled by the Bitcoin protocol allows a multitude of different transaction types to be created. Each scriptSig/scriptPubKey pair is validated by the network miners and mined into a block if the script returns true. Some commonly used Bitcoin puzzle types are described below:
  
 
== Pay to Public Key (P2PK) ==
 
== Pay to Public Key (P2PK) ==
Line 180: Line 147:
 
scriptSig: <sig>
 
scriptSig: <sig>
  
When redeeming coins that have been sent to a Bitcoin public key the script verifies that the provided signature was generated by the private key that also corresponds to the public key.
+
When redeeming coins that have been sent to a Bitcoin public key the script validates that the provided signature was generated by the private key that also corresponds to the public key.
  
 
Checking process:
 
Checking process:
Line 211: Line 178:
 
  scriptSig: <sig> <pubKey>
 
  scriptSig: <sig> <pubKey>
  
A Bitcoin [[address]] is only a hash, so the sender can't provide a full public key in scriptPubKey. When redeeming coins that have been sent to a Bitcoin address, the recipient provides both the signature and the public key. The script verifies that the provided public key does hash to the hash in scriptPubKey, and then it also checks the signature against the public key.
+
A [[Bitcoin address]] is only a hash, so the sender can't provide a full public key in scriptPubKey. When redeeming coins that have been sent to a Bitcoin address, the recipient provides both the signature and the public key. The script verifies that the provided public key does hash to the hash in scriptPubKey, and then it also checks the signature against the public key.
  
 
Checking process:
 
Checking process:
Line 250: Line 217:
  
 
== Pay to R-Puzzle Hash (P2RPH) ==
 
== Pay to R-Puzzle Hash (P2RPH) ==
 +
'''NOTE:''' Since the discovery of a [[R-Puzzles#Signature_Forgeability |transaction malleation exploit]] which allows a message hash and signature to be modified to redirect R-Puzzle inputs to modified outputs, the advised method for using R-Puzzles is to include two signatures generating using different SIGHASH types in order to create a distinct message hash. Take care to generate each signature with a different '''k''' value.
 +
 +
scriptPubKey: '''OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG'''
 +
scriptSig: '''<sig'> <sig> <pubKey>'''
 +
 +
Bitcoins locked in an [[R-Puzzles|R-Puzzle]] script require the spending party to sign using a known value for '[[R-Puzzles#k|k]]' rather than a random number. To redeem the script, the spending party provides both the signature and the public key.
  
scriptPubKey: OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
The script verifies that the provided signature was signed using the correct k-value, then checks the signature against the public key. Because the public key is not checked as part of the script solution, it is possible to sign the transaction using any keypair.
scriptSig: <sig> <pubKey>
 
  
Bitcoins are locked in an R-Puzzle script requiring the spending party to sign using a known value for k rather than a random number. To redeem the script, the spending party provides both the signature and the public key. The script verifies that the provided signature was signed using the correct k-value, then checks the signature against the public key. Because the public key is not checked as part of the script solution, it is possible to sign the transaction using any keypair. This can be useful when dealing with tokens that are associated with a Bitcoin address as the pubkey that corresponds to that address can be used to sign the transaction without the requirement for there to be Bitcoin in the address. The technique is also relevant for Metanet node signing as the Metanet keys can be signed with an R-Puzzle without needing a separate signature.
+
This can be useful when dealing with tokens that are associated with a Bitcoin address as the pubkey that corresponds to that address can be used to sign the transaction without the requirement for there to be bitcoin in the address. The technique is also relevant for Metanet node signing as the Metanet keys can be signed with an R-Puzzle without needing a separate signature.
  
 
Checking process:
 
Checking process:
Line 264: Line 236:
 
|-
 
|-
 
|Empty.
 
|Empty.
| <sig> <pubKey> OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG  
+
| <sig'> <sig> <pubKey> OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG  
 
| scriptSig and scriptPubKey are combined.
 
| scriptSig and scriptPubKey are combined.
 
|-
 
|-
|<sig> <pubKey>
+
| <sig'> <sig> <pubKey>
| OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| Constants are added to the stack.
 
| Constants are added to the stack.
 
|-
 
|-
|<sig> <pubKey> <sig>
+
| <sig'> <sig> <pubKey> <sig>
| OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| Second from top stack item is duplicated.
 
| Second from top stack item is duplicated.
 
|-
 
|-
|<sig> <pubKey> <3 bytes> <sig'>
+
| <sig'> <sig> <pubKey> <3 bytes> <sig'>
| OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| First 3 bytes of signature are split
 
| First 3 bytes of signature are split
 
|-
 
|-
|<sig> <pubKey> <sig'>
+
| <sig'> <sig> <pubKey> <sig'>
| OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| 3 byte data item is removed
 
| 3 byte data item is removed
 
|-
 
|-
|<sig> <pubKey> <R Length> <sig">
+
| <sig'> <sig> <pubKey> <R Length> <sig">
| OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| 1 byte containing R length is split from sig'
 
| 1 byte containing R length is split from sig'
 
|-
 
|-
|<sig> <pubKey> <sig"> <R Length>
+
| <sig'> <sig> <pubKey> <sig"> <R Length>
| OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| R Length parameter is moved to top of stack
 
| R Length parameter is moved to top of stack
 
|-
 
|-
|<sig> <pubKey> <R> <sig"">
+
| <sig'> <sig> <pubKey> <R> <sig'">
| OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| R is split from sig"
 
| R is split from sig"
 
|-
 
|-
|<sig> <pubKey> <R>
+
| <sig'> <sig> <pubKey> <R>
| OP_HASH160 <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
| sig""== is dropped from stack
+
| sig'"== is dropped from stack
 
|-
 
|-
|<sig> <pubKey> <rHashA>
+
| <sig'> <sig> <pubKey> <rHashA>
| <rHash> OP_EQUALVERIFY OP_CHECKSIG
+
| <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| R is double hashed (SHA256 followed by RIPEMD160) and result left on stack
 
| R is double hashed (SHA256 followed by RIPEMD160) and result left on stack
 
|-
 
|-
|<sig> <pubKey> <rHashA> <rHash>
+
| <sig'> <sig> <pubKey> <rHashA> <rHash>
| OP_EQUALVERIFY OP_CHECKSIG
+
| OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 
| Previously defined R-Hash is pushed onto stack
 
| Previously defined R-Hash is pushed onto stack
 
|-
 
|-
|<sig> <pubKey>
+
| <sig'> <sig> <pubKey>
 +
| OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG
 +
| Script checks if rHashA = rHash
 +
|-
 +
| <sig'> <pubKey> <sig> <pubKey>
 +
| OP_CHECKSIGVERIFY OP_CHECKSIG
 +
| Pubkey is tucked behind <sig>
 +
|-
 +
| <sig'> <pubKey>
 
| OP_CHECKSIG
 
| OP_CHECKSIG
| Script checks if rHashA = rHash
+
| Script checks <sig> against <pubKey>
 
|-
 
|-
|true
+
| true
|Empty.
+
| Empty.
|Signature is checked for top two stack items.
+
| <sig'> is checked against <pubKey>
 
|}
 
|}
  
Line 321: Line 301:
 
  scriptSig: OP_1 <sig1> <sig2> <sig4>  
 
  scriptSig: OP_1 <sig1> <sig2> <sig4>  
  
OP_CHECKMULTISIG offers users the capability to lock coins with a requirement for multiple parties to sign the scriptSig before coins can be spent. OP_CHECKMULTISIG can check many signatures against many public keys as long as the signatures in the scriptSig are provided in an order that corresponds to the order in which the public keys are placed in the scriptPubKey. The first opcode in the ScriptPubKey defines how many signatures must be provided in order for the coin to be successfully spent. The last one before OP_CHECKMULTISIG tells the scripting engine how many public keys to evaluate those signatures against. There must be at least as many items on the stack as are required for the OP_CHECKMULTISIG opcode to process or the script will be invalid. The current version of the scripting engine also includes a bug that requires an additional value to be placed on the stack before the signatures. In this example, OP_1 has been used to push a 1 to the top of the stack, but in theory any piece of data can be used. This value is consumed by the checking process but is not evaluated.
+
OP_CHECKMULTISIG offers users the capability to lock coins with a requirement for multiple parties to sign the scriptSig before coins can be spent. OP_CHECKMULTISIG can check many signatures against many public keys as long as the signatures in the scriptSig are provided in an order that corresponds to the order in which the public keys are arrayed on the stack when it is executed. The first opcode in the ScriptPubKey defines how many signatures must be provided in order for the coin to be successfully spent. The last one before OP_CHECKMULTISIG indicates to the scripting engine how many public keys to evaluate those signatures against. There must be at least as many items on the stack as are required for the OP_CHECKMULTISIG opcode to process or the script will be invalid.
 +
 
 +
'''Note:'''
 +
The current version of the scripting engine also includes a bug that requires an additional value to be placed on the stack before the signatures. In this example, OP_1 has been used to push a 1 to the top of the stack, but in theory any piece of data can be used. This value is consumed by the checking process but is not evaluated.
  
 
Checking process:
 
Checking process:
Line 346: Line 329:
 
|Multisignature script evaluation is performed
 
|Multisignature script evaluation is performed
 
|}
 
|}
 
== Generation ==
 
 
Generations have a single input, and this input has a "[[Coinbase |coinbase]]" parameter instead of a scriptSig. The data in "coinbase" can be anything; it isn't used. Bitcoin puts the current compact-format [[target]] and the arbitrary-precision "extraNonce" number there, which increments every time the Nonce field in the [[block_hashing_algorithm|block header]] overflows. Outputs can be anything, but Bitcoin creates one exactly like an IP address transaction.
 
The extranonce contributes to enlarge the domain for the proof of work function. Miners can easily modify nonce (4byte), timestamp and extranonce (2 to 100bytes).
 
  
 
== Other Puzzle Types ==
 
== Other Puzzle Types ==
 
Bitcoin's scripting language is rich and diverse and allows a user to create almost any kind of financial instrument that we have today, and many that we don't have. Puzzles do not need to conform to any particular standard or template however it is expected that the vast majority of transactions will be built using template scripts.
 
Bitcoin's scripting language is rich and diverse and allows a user to create almost any kind of financial instrument that we have today, and many that we don't have. Puzzles do not need to conform to any particular standard or template however it is expected that the vast majority of transactions will be built using template scripts.
 +
 +
Examples of more complex script can be found [[Complex Script Examples| here]]
  
 
Pieces of script can be combined to make larger and more complex transactions, and scripts can be built inside conditional loops allowing a single transaction output to be redeemed in multiple different ways.
 
Pieces of script can be combined to make larger and more complex transactions, and scripts can be built inside conditional loops allowing a single transaction output to be redeemed in multiple different ways.
 +
 +
Prior to the Genesis upgrade, complex scripts that fell outside the 'isstandard' testing schema were required to be compressed into a transaction format called '[[P2SH|Pay to Script Hash (P2SH)]]' This format is now deprecated in favour of using the full, rich scripting language inside transactions.
  
 
=See Also=
 
=See Also=
  
* [[Script]]
+
* [[Opcodes used in Bitcoin Script]]
* [[Protocol rules#"tx" messages|Protocol rules - "tx" messages]]
+
* [[Protocol#"tx" messages|Protocol rules - "tx" messages]]
 
* [[Protocol#Transaction Verification|Protocol documentation - Transaction Verification]]
 
* [[Protocol#Transaction Verification|Protocol documentation - Transaction Verification]]
* [[Raw Transactions]]
 
* [[Coin analogy]]
 
 
* [[Transaction Malleability]]
 
* [[Transaction Malleability]]
* [[Transaction broadcasting]]
 
  
[[Category:Technical]]
+
==Attribution==
[[Category:Vocabulary]]
+
This content is based on content sourced from https://en.bitcoin.it/wiki/Transaction under [https://creativecommons.org/licenses/by/3.0/ Creative Commons Attribution 3.0]. Although it may have been extensively revised and updated we acknowledge the original authors.
[[de:Transaktion]]
 
[[es:Transacción]]
 
[[pl:Transakcje]]
 

Latest revision as of 05:36, 6 November 2020

A Bitcoin transaction consists of a version number, a locktime value, a list of inputs and a list of outputs.

The primary functionality of a Bitcoin transaction is to transfer custody of bitcoin from one to another.

A Bitcoin transaction can also serve as a vehicle for smart contracts, recording data, attestation and many other secondary functionalities.

A transaction can be created and iterated inside a Payment Channel using nLocktime and nSequence interlocks, or sent directly to The Bitcoin Network for inscription into a block. A transaction uses unspent transaction outputs (UTXOs) as inputs and distributes their value to new outputs. UTXOs are the 'coins' in which all bitcoins are stored.

Transactions are not encrypted, so it is possible to browse and view every transaction ever collected into a block. Once transactions have been seen and validated by a majority of block creating nodes in the Bitcoin network, they can be considered settled. When they are eventually mined into a block, miners collaboratively agree on the order in which they were seen by the network.

Transactions are referenced using their TXID which is a double SHA-256 hash of the fully serialised transaction.

Transaction outputs are puzzle scripts called ScriptPubKeys which are typically used to lock the contained bitcoin value, sometimes also called locking script. Outputs are redeemed by making them inputs to new transactions and providing a ScriptSig (sometimes called unlocking script) which is a valid solution that unlocks the bitcoin held in the ScriptPubKey (locking script). Outputs may have zero value in bitcoin, but may carry value in another form such as data or tokens. Scripts can be complex and specialised and may have more than one way to be redeemed.

All transactions are captured on the ledger in blocks on the blockchain, and can be viewed with a block explorer. This can be useful for seeing the technical details of transactions in action and for verifying payments.

General format of a Bitcoin transaction

The following outlines the elements that are serialised to build a valid Bitcoin transaction.

Field Description Size
Version no currently 2 4 bytes
In-counter positive integer VI = VarInt 1 - 9 bytes
list of inputs Input Structure <in-counter> qty with variable length per input
Out-counter positive integer VI = VarInt 1 - 9 bytes
list of outputs Output Structure <out-counter> qty with variable length per output
nLocktime if non-zero and sequence numbers are < 0xFFFFFFFF: block height or timestamp when transaction is final 4 bytes

Transaction Inputs and Outputs

Each Bitcoin transaction is comprised of Inputs and Outputs. Inputs provide the funds to be spent in the transaction, and Outputs define where those funds should be allocated.

Inputs

An input is a reference to an output from a previous transaction, and a transactions can include between 1 and 232 inputs.

All of the new transaction's input value (that is, the total coin value of the previous outputs referenced by the new transaction's inputs) are added up, and the total (less any transaction_fees) is consumed by the outputs of the new transaction.

Previous tx is the TXID of a previous transaction.

Index is the specific output in the referenced transaction.

ScriptSig is the first half of a script which is provided when a UTXO is spent as an input to a transaction.

An input ScriptSig may contain many components. To redeem a P2PKH script the input must provide a public key and an ECDSA signature. The Public key is doubled hashed (First SHA-256 then RIPEMD-160) and the resultant hash must match the hash embedded in the ScriptPubKey of the output being redeemed.

The public key is then used to verify the redeemer's signature. Dependent on the SIGHASH flags used, the signature may cover a hash representing part or all of the transaction. Combined with the public key, this proves the transaction was created by a person or process that controls the keys needed to spend the bitcoin in the input.

Format of a Transaction Input

Otherwise known as a TXIN, the following table outlines the required elements of a valid transaction input.

Field Description Size
Previous Transaction hash TXID of the transaction the output was created in 32 bytes
Previous Txout-index Index of the output (Non negative integer) 4 bytes
Txin-script length Non negative integer VI = VarInt 1 - 9 bytes
Txin-script / scriptSig Script <in-script length>-many bytes
Sequence_no Used to iterate inputs inside a payment channel. Input is final when nSequence = 0xFFFFFFFF 4 bytes

The input sufficiently describes where and how to get the bitcoin amount to be redeemed. If it is the (only) input of the first transaction of a block, it is called the Coinbase message and includes information about which block it was mined in and a miner configurable data element.

Outputs

An output contains a piece of Bitcoin Script which can be used to lock bitcoins, requiring a certain set of keys or information to be provided to unlock them. Outputs can also be used to inscribe data onto the ledger.

This ScriptPubKey is the second half of a full script and is only completed when the output is spent. There can be more than one output, and they share the combined value of the inputs. The Value of each output is the number of Satoshis that the script unlocks when solved. Because each output from one transaction can only ever be referenced once by an input of a subsequent transaction, the entire value of the combined inputs needs to be allocated to the transaction outputs. Any Satoshis left unallocated are considered to be paid in mining fees and are awarded to the miner whose node generates the block that the transaction is included in.

If a user's input is larger than the value they want to send, the transaction must create at least two outputs, one sending the required funds to the destination, and one sending the change back to the user.

Outputs can have a value of zero satoshis. Currently, these outputs are limited to False Return scripts and are typically used to carry other information or tokens for Application layer protocols.

Format of a Transaction Output

Otherwise known as a TXOUT, the following table outlines the required elements of a valid transaction output.

Field Description Size
value non negative integer giving the number of Satoshis to be transferred 8 bytes
Txout-script length non negative integer 1 - 9 bytes VI = VarInt
Txout-script / scriptPubKey Script <out-script length>-many bytes

The output's scriptPubKey sets the conditions to release this bitcoin amount later. The sum of the output values of the first transaction is the value of the mined bitcoins for the block plus possible transactions fees of the other transactions in the block.

Transaction Validation

To verify that inputs are authorized to collect the values of referenced outputs, Bitcoin uses a Forth-like scripting system. The input's scriptSig and the referenced output's scriptPubKey are evaluated (in that order), with scriptPubKey using the values left on the stack by the scriptSig. The input is authorized if scriptPubKey returns true. Through the scripting system, the sender can create very complex conditions that must be met in order to claim the output's value.

For example, it's possible to create an output that can be claimed by anyone without any authorization. It's also possible to require that an input be signed by ten different keys or be redeemable with a password instead of a key.

Puzzles and Solutions

The flexible scripting language enabled by the Bitcoin protocol allows a multitude of different transaction types to be created. Each scriptSig/scriptPubKey pair is validated by the network miners and mined into a block if the script returns true. Some commonly used Bitcoin puzzle types are described below:

Pay to Public Key (P2PK)

scriptPubKey: <pubKey> OP_CHECKSIG scriptSig: <sig>

When redeeming coins that have been sent to a Bitcoin public key the script validates that the provided signature was generated by the private key that also corresponds to the public key.

Checking process:

Stack Script Description
Empty. <sig> <pubKey> OP_CHECKSIG scriptSig and scriptPubKey are combined.
<sig> <pubKey> OP_CHECKSIG Signature is added to the stack.
<sig> <pubKey> OP_CHECKSIG Pubkey is added to stack.
true Empty. Signature is checked.

Pay to Public Key Hash (P2PKH)

scriptPubKey: OP_DUP OP_HASH160 <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG
scriptSig: <sig> <pubKey>

A Bitcoin address is only a hash, so the sender can't provide a full public key in scriptPubKey. When redeeming coins that have been sent to a Bitcoin address, the recipient provides both the signature and the public key. The script verifies that the provided public key does hash to the hash in scriptPubKey, and then it also checks the signature against the public key.

Checking process:

Stack Script Description
Empty. <sig> <pubKey> OP_DUP OP_HASH160 <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG scriptSig and scriptPubKey are combined.
<sig> <pubKey> OP_DUP OP_HASH160 <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG Constants are added to the stack.
<sig> <pubKey> <pubKey> OP_HASH160 <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG Top stack item is duplicated.
<sig> <pubKey> <pubHashA> <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG Top stack item is hashed.
<sig> <pubKey> <pubHashA> <pubKeyHash> OP_EQUALVERIFY OP_CHECKSIG Constant added.
<sig> <pubKey> OP_CHECKSIG Equality is checked between the top two stack items.
true Empty. Signature is checked for top two stack items.

Pay to R-Puzzle Hash (P2RPH)

NOTE: Since the discovery of a transaction malleation exploit which allows a message hash and signature to be modified to redirect R-Puzzle inputs to modified outputs, the advised method for using R-Puzzles is to include two signatures generating using different SIGHASH types in order to create a distinct message hash. Take care to generate each signature with a different k value.

scriptPubKey: OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG scriptSig: <sig'> <sig> <pubKey>

Bitcoins locked in an R-Puzzle script require the spending party to sign using a known value for 'k' rather than a random number. To redeem the script, the spending party provides both the signature and the public key.

The script verifies that the provided signature was signed using the correct k-value, then checks the signature against the public key. Because the public key is not checked as part of the script solution, it is possible to sign the transaction using any keypair.

This can be useful when dealing with tokens that are associated with a Bitcoin address as the pubkey that corresponds to that address can be used to sign the transaction without the requirement for there to be bitcoin in the address. The technique is also relevant for Metanet node signing as the Metanet keys can be signed with an R-Puzzle without needing a separate signature.

Checking process:

Stack Script Description
Empty. <sig'> <sig> <pubKey> OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG scriptSig and scriptPubKey are combined.
<sig'> <sig> <pubKey> OP_OVER OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG Constants are added to the stack.
<sig'> <sig> <pubKey> <sig> OP_3 OP_SPLIT OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG Second from top stack item is duplicated.
<sig'> <sig> <pubKey> <3 bytes> <sig'> OP_NIP OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG First 3 bytes of signature are split
<sig'> <sig> <pubKey> <sig'> OP_1 OP_SPLIT OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG 3 byte data item is removed
<sig'> <sig> <pubKey> <R Length> <sig"> OP_SWAP OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG 1 byte containing R length is split from sig'
<sig'> <sig> <pubKey> <sig"> <R Length> OP_SPLIT OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG R Length parameter is moved to top of stack
<sig'> <sig> <pubKey> <R> <sig'"> OP_DROP OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG R is split from sig"
<sig'> <sig> <pubKey> <R> OP_HASH160 <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG sig'"== is dropped from stack
<sig'> <sig> <pubKey> <rHashA> <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG R is double hashed (SHA256 followed by RIPEMD160) and result left on stack
<sig'> <sig> <pubKey> <rHashA> <rHash> OP_EQUALVERIFY OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG Previously defined R-Hash is pushed onto stack
<sig'> <sig> <pubKey> OP_TUCK OP_CHECKSIGVERIFY OP_CHECKSIG Script checks if rHashA = rHash
<sig'> <pubKey> <sig> <pubKey> OP_CHECKSIGVERIFY OP_CHECKSIG Pubkey is tucked behind <sig>
<sig'> <pubKey> OP_CHECKSIG Script checks <sig> against <pubKey>
true Empty. <sig'> is checked against <pubKey>

Pay to Multi Signature (P2MS)

scriptPubKey: OP_3 <pubKey1> <pubKey2> <pubKey3> <pubKey4> <pubKey5> OP_5 OP_CHECKMULTISIG
scriptSig: OP_1 <sig1> <sig2> <sig4> 

OP_CHECKMULTISIG offers users the capability to lock coins with a requirement for multiple parties to sign the scriptSig before coins can be spent. OP_CHECKMULTISIG can check many signatures against many public keys as long as the signatures in the scriptSig are provided in an order that corresponds to the order in which the public keys are arrayed on the stack when it is executed. The first opcode in the ScriptPubKey defines how many signatures must be provided in order for the coin to be successfully spent. The last one before OP_CHECKMULTISIG indicates to the scripting engine how many public keys to evaluate those signatures against. There must be at least as many items on the stack as are required for the OP_CHECKMULTISIG opcode to process or the script will be invalid.

Note: The current version of the scripting engine also includes a bug that requires an additional value to be placed on the stack before the signatures. In this example, OP_1 has been used to push a 1 to the top of the stack, but in theory any piece of data can be used. This value is consumed by the checking process but is not evaluated.

Checking process:

Stack Script Description
Empty. OP_1 <sig1> <sig2> <sig4> OP_3 <pubKey1> <pubKey2> <pubKey3> <pubKey4> <pubKey5> OP_5 OP_CHECKMULTISIG scriptSig and scriptPubKey are combined.
1 <sig1> <sig2> <sig4> OP_3 <pubKey1> <pubKey2> <pubKey3> <pubKey4> <pubKey5> OP_5 OP_CHECKMULTISIG Constants from scriptSig are added to the stack.
1 <sig1> <sig2> <sig4> 3 <pubKey1> <pubKey2> <pubKey3> <pubKey4> <pubKey5> 5 OP_CHECKMULTISIG Constants from scriptPubKey are added to the stack.
true Empty. Multisignature script evaluation is performed

Other Puzzle Types

Bitcoin's scripting language is rich and diverse and allows a user to create almost any kind of financial instrument that we have today, and many that we don't have. Puzzles do not need to conform to any particular standard or template however it is expected that the vast majority of transactions will be built using template scripts.

Examples of more complex script can be found here

Pieces of script can be combined to make larger and more complex transactions, and scripts can be built inside conditional loops allowing a single transaction output to be redeemed in multiple different ways.

Prior to the Genesis upgrade, complex scripts that fell outside the 'isstandard' testing schema were required to be compressed into a transaction format called 'Pay to Script Hash (P2SH)' This format is now deprecated in favour of using the full, rich scripting language inside transactions.

See Also

Attribution

This content is based on content sourced from https://en.bitcoin.it/wiki/Transaction under Creative Commons Attribution 3.0. Although it may have been extensively revised and updated we acknowledge the original authors.